清洗積碳的原因

Reasons for cleaning carbon deposits

積碳是發動機不完全燃燒而產生的沉積物，影響發動機正常運行，積碳嚴重時還會導致發動機損壞。如果不及時清除積碳將會給愛車帶來冷啟動困難、怠速抖動、油耗增加、發動機噪聲大、加速無力以及尾氣排放超標等其他的危害，因此，需要及時清除汽車積碳。

Carbon deposits are deposits generated by incomplete combustion of the engine, which affect the normal operation of the engine. Severe carbon deposits can also lead to engine damage. If carbon deposits are not removed in a timely manner, it will cause difficulties in cold starting, idle shaking, increased fuel consumption, high engine noise, weak acceleration, and excessive exhaust emissions to your car. Therefore, it is necessary to remove carbon deposits in a timely manner.

核桃砂

Walnut sand

核桃砂是由核桃殼敲碎后，經嚴格篩選分類多道工序精制而成。硬度低且不含硅，有良好的韌性和彈性，可用于清理金屬、合金和電子塑膠工件，同時不會損傷工件表面。核桃砂的特點是天然材料，綠色環保、物理清洗，不傷工件、徹底清除積碳和具有改善發動機性能的功能。

Walnut sand is made by crushing walnut shells and refining them through strict screening, classification, and multiple processes. Low hardness and silicon free, with good toughness and elasticity, it can be used to clean metal, alloy, and electronic plastic workpieces without damaging the surface of the workpiece. The characteristics of walnut sand are natural materials, green environmental protection, physical cleaning, no damage to workpieces, thorough removal of carbon deposits, and the ability to improve engine performance.

核桃砂除積碳

Carbon removal from walnut sand

利用設備及高氣壓將天然植物核桃砂直接作用于進氣系統管道及進氣門，可徹底清除積碳，因原材料為天然植物核桃且無化學成分，因此安全可靠。清洗效果顯著，可徹底清除進氣管道、進氣門上附著較厚的積碳，清洗后動力提升，耗油量減少，尾氣排放改善。

By using equipment and high pressure, natural plant walnut sand can be directly applied to the intake system pipeline and intake valve to completely remove carbon deposits. As the raw material is natural plant walnut and has no chemical components, it is safe and reliable. The cleaning effect is significant, which can completely remove the thick carbon deposits attached to the intake pipes and valves. After cleaning, the power is improved, fuel consumption is reduced, and exhaust emissions are improved.

核桃砂除積碳作業流程

Carbon removal process for walnut sand

拆卸進氣歧管

Removing intake manifold

使用噴沙設備將天然植物核桃砂打入各氣歧管道及進氣門部件，以此清除進氣系統積碳。

Use sandblasting equipment to inject natural plant walnut sand into various gas pipelines and intake valve components to remove carbon deposits in the intake system.

運用動力吸塵設備將各進氣歧管內部的核桃砂及積碳完全吸附出來。

Use power vacuum equipment to completely absorb the walnut sand and carbon deposits inside each intake manifold.

清除發動機周圍殘留核桃砂，裝復進氣歧管，試車。

Remove residual walnut sand around the engine, reinstall the intake manifold, and conduct a test drive.

本文由濟南寶馬汽車專修友情奉獻.更多有關的知識請點http://www.zhongzaojixie.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is dedicated to friendship by Jinan BMW Automotive. For more related knowledge, please click on http://www.zhongzaojixie.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned